Archive

PROFINET

PI UK SeminarHere – in full detail – is the agenda of our free-to-attend seminar – June 20th, Manchester.

The good news, too, is that there are still a few places available if you book now!

Time Item Presenter
09:15 – 09:30 Welcome and introduction to exhibitors Andy Smith, E+H
09:30 – 10:00 PROFIBUS International and basics of PROFIBUS and PROFINET

An overview of the Group’s structure and global representation, taking a look at the protocol basics and their differences, plus showing the progress of the number of installed devices from the group’s supported technologies and relating these figures to their market share.

Mark Freeman, Siemens
10:00 – 10:30 PROFIBUS DP/PA network design

“During my nearly 30 years in the industry, I have seen the benefits of using both PROFIBUS and PROFINET solutions. However, I have also felt the pain of installation, panel build and commissioning.  This presentation is a condensed summary of best practice and hazards to be watchful for.”

Chris McComb, iTech
10:30 – 11:00 Coffee and exhibition
11:00 – 11:30 PROFINET network design Andy Williams, Siemens
It is widely accepted that the most important decisions are made at the design stage of a project. This presentation examines the fundamental principles of good network design for PROFINET systems, although many of the ideas are applicable to PROFIBUS and other networking systems. The presentation will discuss the main factors that must be considered at the design stage of an automation system. Practical examples will show how facilities for health checking, fault-finding and maintenance can have a crucial impact on plant availability. The presentation will also examine how properly thought out network monitoring and redundancy can drastically affect plant up-time and thus profitability.
11:30 – 12:00 Industrial network commissioning and testing Dave Tomlin, Hitex
Identifying potential future problems, diagnosing current problems and the steps to take to make your network fit for the future.
12:00 – 12:30 PROFIBUS and PROFINET device configuration tools. Phil Waterworth, Endress + Hauser
A look at the types of tools and their development followed by a live demonstration of PROFIBUS and PROFINET device configuration using an open platform and web browser option.
12:30 – 13:00 IO-Link technology Adrian Sorsby, Balluff
This presentation will be covering what a typical IO-Link solution consists of, how it interfaces to the control system and the benefits that can be derived from this increased level of communication with IO-Link devices. These include easier handling of measurement signals, remote and automatic device parameterisation, smart sensor diagnostic functions, safety over IO-Link whilst also being an enabler for Industrial IoT and Industry 4.0 strategies.
13:00 – 14:00 Lunch and Exhibition
14:00 – 14:30 Industrial networks safety & security Ben Murphy, Siemens
This presentation will discuss why cybersecurity is an issue for safety instrumented systems and will examine example architectures when communicating with the SIS.
14:30 – 15:00 Industry 4.0 and the Industrial Internet of Things (IIoT) Derek Lane, Wago
A short journey to explain IIoT The Industrial Internet of things, IND4.0 from IND1.0 and Big Data. How PROFINET is placed as the ideal Industrial Fieldbus to fulfil the above, how its implemented and why you should consider it. Some of the myths explained.
15:00 – 15:30 Summary, questions & close Andy Smith, E+H

Hosted by Endress + Hauser, this event addresses the key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications, with particular attention to Industry 4.0 and the Industrial Internet of Things (IIoT).

Covering key application areas such as mechanical handling and logistics, robotics, automotive engineering, electrical and electronics assembly, control systems and energy management, pulp & paper, chemical, utilities, pharmaceutical, packaging and printing, it focuses on the practical aspects of using PROFIBUS, PROFINET and IO-Link, from system design and safety considerations through to fault-finding and maintenance.

Supported by an exhibition with demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant.

With nearly 80 million nodes installed worldwide, PROFIBUS, PROFINET and IO-Link are truly market leaders, providing state of the art digital communications addressing all the needs of manufacturing and process industries, significantly lowering capital expenditure on installation, commissioning and maintenance. They offer unprecedented integration of automation, control, monitoring and safety systems using standardised and widely supported communications and networking solutions.

This seminar is ably presented by specialists from PI UK member companies. Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to experts.

More information and online Registration

In case of difficulty contact Ann on tel: 00 44 207 193 8018 or email admin@profibus.org.uk

 

Don’t delay, Book Today!

Table-top exhibition to accompany PI UK seminar.

Taking place in Manchester on June 20, this free-to-attend seminar will be supported by an exhibition with live product demonstrations, making it of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant.

The event addresses key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications, with particular attention to Industry 4.0 and the Industrial Internet of Things (IIoT).

Exhibitors include:

Here are a few examples of what will be on display:

iTech

iTech is an established control and automation system integration company. The company has over 20 years’ experience providing and supplying service requirements to the automation industry utilising PLC’s, HMI’s and SCADA’s. We also provide system design and software development, from conception through to installation and commissioning. www.itech-troon.co.uk

Belcom

Belcom Cables is a specialist supplier of industrial automation cables. As senior members of PROFIBUS UK they hold large stocks of PROFIBUS, PROFINET and fibre optic cables. Their Profi- cables are available with either solid or stranded conductors and either pvc or lszh outer sheaths. Available in softskin or with Belcom’s Dataguard SWA protection for harsh environments. Cables are both UV stable and colourfast. www.belcom.co.uk/

Industrial Comms

Industrial Communications will be showing a portfolio of products from Deutschmann, Softing, Belden-Hirschmann and Metz Connect. All the products and services on display will be of relevance to designers, implementers and operators of PROFIBUS and/or PROFINET networks, including embedded modules, connectors, cables, hubs, routers, gateways, fibre optic and wireless interfaces. Services include network design, installation, commissioning, validation, testing, monitoring and security auditing. www.industrialcomms.co.uk

Balluff will be showcasing the flexibility of IO-Link both for handling smart sensors and also for simplifying the wiring and installation of safety devices via our Profisafe over IO-Link module. Furthermore, we will also be demonstrating how it can be an ideal platform for Industry 4.0 based strategies. Balluff

WAGO will be demonstrating its PFC200 with PROFIBUS master, this also has the IO-Link gateway module connected with a Balluff ultrasonic sensor and light stack. Selection of interface and terminal product. Samples of new 6mm 221 connector. WAGO

PROFIBUS, PROFINET and IO-Link

With nearly 90 million nodes installed worldwide, PROFIBUS, PROFINET and IO-Link are truly market leaders, providing state of the art digital communications addressing all the needs of manufacturing and process industries, significantly lowering capital expenditure on installation, commissioning and maintenance. They offer unprecedented integration of automation, control, monitoring and safety systems using standardised and widely supported communications and networking solutions.

Covering key application areas such as mechanical handling and logistics, robotics, automotive engineering, electrical and electronics assembly, control systems and energy management, pulp & paper, chemical, utilities, pharmaceutical, packaging and printing, the event focuses on the practical aspects of using PROFIBUS, PROFINET and IO-Link, from system design and safety considerations through to fault-finding and maintenance.

More about the Seminar

This seminar is ably presented by specialists from PI UK member companies. Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to experts.

Agenda (Registration and Coffee 8.45 am)

Time Item Presenter
09:15 – 09:30 Welcome and introduction to exhibitors Andy Smith, E+H
09:30 – 10:00 PROFIBUS International and basics of PROFIBUS and PROFINET Mark Freeman, Siemens
10:00 – 10:30 PROFIBUS DP/PA network design Chris McComb, iTech
10:30 – 11:00 Coffee and exhibition
11:00 – 11:30 PROFINET network design Andy Gilbert, Siemens
11:30 – 12:00 Industrial network commissioning and testing Dave Tomlin, Hitex
12:00 – 12:30 PROFIBUS and PROFINET device configuration tools.  Phil Waterworth, Endress + Hauser
12:30 – 13:00 Lunch and Exhibition or Facility tour
13:00 – 14:00 IO-Link technology Adrian Sorsby, Balluff
14:00 – 14:30 Industrial networks safety & security Ben Murphy, Siemens
14:30 – 15:00 Industry 4.0 and the Industrial Internet of Things (IIoT) Derek Lane, Wago
15:00 – 15:15 Summary, questions & close  Andy Smith, E+H
(Click here to see synopses of the presentations …)

More information and online Registration

In case of difficulty contact Ann on tel: 00 44 207 193 8018 or email admin@profibus.org.uk

 

2017 PROFIBUS, PROFINET and IO-Link Node Count numbers released

The installed base of devices with interfaces of the communication technologies of PROFIBUS & PROFINET International (PI) continues its very strong overall market position. Against the background of Industry 4.0 incorporation into the automation of production systems, this is a clear sign of the acceptance of PI technologies in this innovative domain.

PROFINET

Profinet nodes 2017

Profinet nodes 2017

The development of PROFINET is very encouraging. In 2017, a record 4.5 million PROFINET devices were put on the market. This brought the total number to 20.9 million at the end of 2017, which represents an increase of 27.5% over the previous year.

PROFIBUS

2.3 million PROFIBUS devices were produced in 2017, only slightly fewer than the previous year. However, the total of 58.4 million devices across all years still represents a record.

PROFIsafe

Profisafe nodes 2017

Profisafe nodes 2017

The development of PROFIsafe is still very encouraging: with 1.95 million nodes put on the market, it has been able to achieve above-average growth again of nearly 28% and can now boast 8.9 million installed nodes.

IO-Link

IO-Link nodes 2017

IO-Link nodes 2017

IO-Link, in turn, experienced the largest increase of  52.8 % over the year in 2017. This brings the total number of installed IO-Link devices to more than 8.1 million.

 

Process-seminar-e+h-march2017Free-to-attend PI UK seminar

Hosted by Endress + Hauser, this event addresses the key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications, with particular attention to Industry 4.0 and the Industrial Internet of Things (IIoT).

Covering key application areas such as mechanical handling and logistics, robotics, automotive engineering, electrical and electronics assembly, control systems and energy management, pulp & paper, chemical, utilities, pharmaceutical, packaging and printing, it focuses on the practical aspects of using PROFIBUS, PROFINET and IO-Link, from system design and safety considerations through to fault-finding and maintenance.

Supported by an exhibition with demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant.

With nearly 80 million nodes installed worldwide, PROFIBUS, PROFINET and IO-Link are truly market leaders, providing state of the art digital communications addressing all the needs of manufacturing and process industries, significantly lowering capital expenditure on installation, commissioning and maintenance. They offer unprecedented integration of automation, control, monitoring and safety systems using standardised and widely supported communications and networking solutions.

This seminar is ably presented by specialists from PI UK member companies. Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to experts.

Draft Agenda (Registration and Coffee 8.45 am)

Time Item Presenter
09:15 – 09:30 Welcome and introduction to exhibitors Andy Smith, E+H
09:30 – 10:00 PROFIBUS International and basics of PROFIBUS and PROFINET Mark Freeman, Siemens
10:00 – 10:30 PROFIBUS DP/PA network design Chris McComb, iTech
10:30 – 11:00 Coffee and exhibition
11:00 – 11:30 PROFINET network design Andy Gilbert, Siemens
11:30 – 12:00 Industrial network commissioning and testing Dave Tomlin, Hitex
12:00 – 12:30 PROFIBUS and PROFINET device configuration tools.  Phil Waterworth, Endress + Hauser
12:30 – 13:00 Lunch and Exhibition or Facility tour
13:00 – 14:00 IO-Link technology Russell Smith, Balluff
14:00 – 14:30 Industrial networks safety & security Ben Murphy, Siemens
14:30 – 15:00 Industry 4.0 and the Industrial Internet of Things (IIoT) Derek Lane, Wago
15:00 – 15:15 Summary, questions & close  Andy Smith, E+H
(Click here to see synopses of the presentations …)

More information and online Registration

In case of difficulty contact Ann on tel: 00 44 207 193 8018 or email admin@profibus.org.uk

 

From Research to the Global Network: The possibilities offered by PROFIBUS and PROFINET in the age of IoT and Industry 4.0

The past three decades have been an exciting time for fieldbus technology. What began as a research project is today the basis for forward-looking Industry 4.0 concepts. And despite the sophisticated technology from PROFIBUS and PROFINET, the future continues to offer a wealth of exciting tasks – such as the integration of TSN.

Today, users can depend on fieldbus devices to reliably communicate with one another, regardless of the manufacturer. This has not always been the case – 30 years ago, the costs of installation, configuration and operationweres enormous. Today’s simplicity for the user is no coincidence. In the first stages of the development of PROFIBUS, two courses were set, which from today’s perspective were almost visionary. The one was the promotion of a development-related standardization process. The other was that the newly-developed fieldbus should be able to be used by all companies. Even with further developments, the user organization – which is now internationally active – has not deviated from these two principles. However, until the point of practical maturity, numerous detail tasks were on the agenda. In addition to the actual technology, a unique quality assurance system – with interface tests, interoperability tests and certification – is also part of the fieldbus world. In order to take into account the application-specific features, the technical committees developed standardized profiles right from the start. This means that the PROFIdrive application profile meets the special requirements of drive technology in combination with the PROFIBUS and PROFINET communication systems. A little later, the PA devices profile for the process industry followed. In 1999, PROFIsafe was presented at the Hannover Messe. The development of PROFIenergy, the vendor-neutral, energy saving profile – which permits the targeted shutdown and restart of components such as lasers, robots or drives during production breaks – also met with great interest a few years ago. In the meantime, the first applications, among others in the automotive industry, are in operation.

Communication of the Future

Very early, PROFIBUS & PROFINET International (PI) relied on Ethernet-based communication. As early as 2001, the first pilot application with PROFINET was introduced. Shortly thereafter, a certification system was established, and the first PROFINET Competence Centers and test laboratories began operations. In 2004, PROFINET achieved a large-scale breakthrough in the automotive industry. Since then, PI has continued to further develop the open Industrial Ethernet standard.Through Fast Forwarding, Dynamic Frame Packing and Fragmentation, cycle times of up to 31.25 μs – along with high-precision isochrone mode – is possible. And even before Industry 4.0 was a mainstream topic in the industrial world, the lifecycle management of plants and machines was high on the priority list for the operators. For this reason, PROFINET has integrated appropriate diagnostics mechanisms to support standardized preventive maintenance. PROFINET stands out with its unique range of functions. The device diagnostics PROFIBUS is known for don’t just enable fast troubleshooting – for example, in the event of a short circuit or cable break. The integrated network diagnostics also ensures short downtimes for many other incidents and helps to optimize the performance of the network.

Seamless integration of new technologies

Increasingly, issues from the IoT and Industry 4.0 worlds are being brought to PI, driven not by the automation industry, but by information technology or basic Ethernet technology. PI sees it as its very own task to integrate new functions and features into proven PI technologies so that they work seamlessly with existing and proven systems. A current example is the integration of TSN: In Industry 4.0 applications, converged networks are real added value. They are characterized by the fact that the IT systems can easily be connected to the OT side. Data from production can be used in software applications without difficulty – for example, for process optimization. It’s also easier to integrate cloud platforms – be it on-site or anywhere in the world. The reporting is simplified with regards to plant or machine performance. Of particular interest is that through the continued evolution of the Ethernet in IEEE 802.1, future devices with standard Ethernet controllers will be developed that will meet all the robustness and deterministic requirements of industrial automation. However, an important finding of the work so far is that the simple configuration of the TSN network parameters will be decisive for user acceptance. For this reason, PI is primarily pursuing the decentralized configuration model of the IEEE – currently being tested in the testbed at Labs Network Industrie 4.0 e.V., for instance – which can be used to create flexible and powerful plant networks.

Simultaneous continuity and progress

Tasks and technologies are constantly changing, but the principles of PI – standardization and openness – will remain as constants. PI is committed to identifying the most important communication requirements for Industry 4.0 and standardizing them as PI technologies are further developed. The key is: users can continue to depend on the fact that the technology they’re already using will last and the transition to new technologies will happen easily.

What you should know about TSN: Karsten Schneider, PI Chairman, gives you the answers!

What can TSN do better than previous Ethernet solutions? 

Karsten Schneider: Ethernet TSN essentially extends the existing mechanisms of Ethernet to include “Quality of Service“ (e.g., bandwidth reservation), synchronization, as well as low latency and even bumpless redundancy. In practice, it looks like this: The applications report their communication needs to the network and get the respective requested QoS guaranteed by the network. The respective connections then run in so-called streams, which then enjoy bandwidth protection via resource allocation in the memory of the switches. In principle, each of these streams can be given a real-time capability. Due to the encapsulated streams, it is also possible with TSN that several real-time capable protocols can be operated in parallel in a single network. This is also known as network convergence.

Is TSN sufficient to transition systems into the age of Industry 4.0?

Karsten Schneider: TSN is just one building block on the way to Industry 4.0-capable systems. PI is currently working on using TSN for PROFINET, but TSN has only layer 2 mechanisms – that is, pure data transport. While this helps break down barriers to communication, IT systems do not understand the meaning of individual data from the machine. So, something must be said about the content. With a suitable semantic description, such as that already stored in the PROFINET application profiles, a quality management system without additional configuration knows that the value received is the torque from a screwdriver control unit. Only then can pure data be used profitably. Apart from that, other topics – such as security, safety or OPC UA – have to be considered for Industry 4.0.

What will happen to the previous PROFINET profiles when using TSN? 

Karsten Schneider: For years, PI has been working on corresponding profile definitions in which information from devices is described and standardized across manufacturers. With TSN, these profiles can continue to be used, along with the complete PROFINET know-how. The vision for PROFINET applications does not change due to TSN. In addition, PI is now incorporating these profiles into the joint working group with the OPC Foundation to create open information models. These can easily be made available to IT systems via OPC UA. Companion specifications for OPC UA arise here with the usage of PI know-how. This will make it even easier to implement Industry 4.0 applications in the future.

Are there already chips for TSN? 

Karsten Schneider: TSN requires a“TSN-capable“ chip. The chips used today cannot usually be upgraded through software on TSN. However, it is foreseeable that, in the future, the standard Ethernet chip will be a TSN-capable chip. Well-known chip manufacturers have already started, or at least announced, the development of chips with TSN mechanisms. Likewise, well-known PROFINET chip manufacturers will develop modules with RT/IRT and TSN, so that the hardware does not have to be changed during the transition to TSN.

What is the timeframe for the developments? 

Karsten Schneider: You should expect it to take up to ten years until a new technology is really assimilated into practice.This is at least the experience we had with the introduction of PROFIBUS and PROFINET. There may be industries where implementation is faster. But one should not forget that it is not only about the creation of the specification – which should be completed in 2019 – but also about topics such as certification, documentation, training and seminars.

These things also require time!

Advanced Forming Research Centre - Strathclyde University

Advanced Forming Research Centre

AFRC, Catapult Centre, Inchinnan, April 17th, 2018

Places are filling up fast at our free-to-attend seminar, so don’t delay in reserving yours!

We’ve updated the agenda to now include a presentation covering Industrial networks safety & security, and have brought forward the seminar start time by 15 minutes to accommodate the change.

The keynote address entitled “OEM Lifecycle – The Past, Present and Future” will set the scene for this highly topical seminar addressing the key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications, with particular attention to Industry 4.0 and the Industrial Internet of Things (IIoT).

Covering key application areas such as mechanical handling and logistics, robotics, automotive engineering, electrical and electronics assembly, control systems and energy management, pulp & paper, chemical, utilities, pharmaceutical, packaging and printing, it focuses on the practical aspects of using PROFIBUS, PROFINET and IO-Link, from system design and safety considerations through to fault-finding and maintenance.

Revised agenda (as of 14th March)

Time Item Presenter
09:15 – 09:30 Welcome and introduction to exhibitors Chris McComb, iTech
09:30 – 10:00 Keynote address: OEM Lifecycle – The Past, Present and Future Chris McComb, iTech
10:00 – 10:30 PROFIBUS International and basics of PROFIBUS and PROFINET Mark Freeman, Siemens
10:30 – 11:00 PROFIBUS DP/PA network design Chris McComb, iTech
11:00 – 11:30 Coffee and exhibition
11:30 – 12:00 PROFINET network design Andy Gilbert, Siemens
12:00 – 12:30 The effects of EMC on bus networks Peter Thomas, Control Specialists
12:30 – 13:00 Industrial network commissioning and testing Dave Tomlin, Hitex
13:00 – 14:00 Lunch and Exhibition or Facility tour
14:00 – 14:30 PROFIBUS and PROFINET device configuration tools. Phil Waterworth, Endress + Hauser
14:30 – 15:00 IO-Link technology Russell Smith, Balluff
15:00 – 15:30 Industrial networks safety & security Tom Hammond, Siemens
15:30 – 16:00 Industry 4.0 and the Industrial Internet of Things (IIoT) Derek Lane, Wago
16:00 Close

Exhibition too …

Supported by an exhibition with demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers, and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant. Current exhibitors include:

With nearly 80 million nodes installed worldwide, PROFIBUS, PROFINET and IO-Link are truly market leaders, providing state of the art digital communications addressing all the needs of manufacturing and process industries, significantly lowering capital expenditure on installation, commissioning and maintenance. They offer unprecedented integration of automation, control, monitoring and safety systems using standardised and widely supported communications and networking solutions.

This seminar is ably presented by specialists from PI UK member companies. Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to experts.

Previous comments/feedback include:

“Very well presented and a lot of useful information” “Fantastic as always and very informative”

“Superb day for experience and information”

If you’d like to learn how to simplify your PROFIBUS, PROFINET or IO-Link application … don’t miss this one-day Seminar!

More information and Registration

Advanced Forming Research Centre - Strathclyde University

Advanced Forming Research Centre

AFRC, Catapult Centre, Inchinnan, April 17th, 2018

A new keynote address entitled “OEM Lifecycle – The Past, Present and Future” will set the scene for this highly topical seminar addressing the key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications, with particular attention to Industry 4.0 and the Industrial Internet of Things (IIoT).

Covering key application areas such as mechanical handling and logistics, robotics, automotive engineering, electrical and electronics assembly, control systems and energy management, pulp & paper, chemical, utilities, pharmaceutical, packaging and printing, it focuses on the practical aspects of using PROFIBUS, PROFINET and IO-Link, from system design and safety considerations through to fault-finding and maintenance.

Draft agenda (as of 22nd Feb)

Time Item Presenter
09:15 – 09:30 Welcome and introduction to exhibitors Ian McCartney, iTech
09:30 – 10:00 Keynote address: OEM Lifecycle – The Past, Present and Future iTech
10:00 – 10:30 PROFIBUS International and basics of PROFIBUS and PROFINET Mark Freeman, Siemens
10:30 – 11:00 PROFIBUS DP/PA network design iTech
11:00 – 11:30 Coffee and exhibition
11:30 – 12:00 PROFINET network design Andy Gilbert, Siemens
12:00 – 12:30 The effects of EMC on bus networks Peter Thomas, Control Specialists
12:30 – 13:00 Industrial network commissioning and testing Dave Tomlin, Hitex
13:00 – 14:00 Lunch and Exhibition or Facility tour
14:00 – 14:30 PROFIBUS and PROFINET device configuration tools. Phil Waterworth, Endress + Hauser
14:30 – 15:00 IO-Link technology Russell Smith, Balluff
15:00 – 15:30 Industrial networks safety & security Mark McCormick, Siemens
15:30 – 16:00 Industry 4.0 and the Industrial Internet of Things (IIoT) Derek Lane, Wago
16:00 Close

Who should attend?

Supported by an exhibition with demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers, and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant.

With nearly 80 million nodes installed worldwide, PROFIBUS, PROFINET and IO-Link are truly market leaders, providing state of the art digital communications addressing all the needs of manufacturing and process industries, significantly lowering capital expenditure on installation, commissioning and maintenance. They offer unprecedented integration of automation, control, monitoring and safety systems using standardised and widely supported communications and networking solutions.

This seminar is ably presented by specialists from PI UK member companies. Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to experts.

Previous comments/feedback include:

“Very well presented and a lot of useful information” “Fantastic as always and very informative”

“Superb day for experience and information”

If you’d like to learn how to simplify your PROFIBUS, PROFINET or IO-Link application … don’t miss this one-day Seminar!

More information and Registration

%d bloggers like this: