Archive

Product News

*** Press Information ***

Nuremberg – November 29, 2017: In addition to dedicated work on the integration of new standards such as TSN, the PI (PROFIBUS & PROFINET International) community also drives further development of today’s basic technologies forward. That also makes sense, since a broad base due to a large diversity of manufacturers and very varied high-quality devices establishes a firm foundation for the steady continuation of the innovative PROFINET standard.

Thus, Siemens also offers a new development kit for integration of a PROFINET IRT Controller into any desired target systems. Its core is the ASIC SOC1 proven in many of their products and the associated firmware stack. A configuration library derived from already proven engineering tools is available for easy network parameterization in the particular engineering environment of the target system. The required software components are supplied in source code so possible adaptations or portings necessary for integration into the particular target systems can be carried out. A fast, easy start is possible with the CP 1625 evaluation board as the development platform. The interface to the application for the long-established PROFINET RT Controller, which is used in various customer products, was enhanced with functions for IRT and clock synchronization.

There is also good news on the subject of drive technology. Application examples for drive classes AC1 (standard drive) and AC4 (servo drive) are available for easy implementation of the PROFIdrive drive profile in the devices on both the controller and device side.

Hilscher, the independent communications specialist, has rounded off the spectrum of real-time Ethernet protocols for netX with the PROFINET IRT Controller technology. The PROFINET IRT Controller is now a standard part of the established CIFX PC cards or net Jack and COMX embedded modules.

Alternatively, the PROFINET IRT Controller can be used with the Hilscher netX multi-protocol master chips for integration in designs. Design of the IRT network is carried out exclusively with the proven Hilscher SYCON.net configuration tool.

Both the PROFINET IRT Controller and the PROFINET IRT Device can be operated together with the PROFIdrive reference implementations. The appropriate interface adaptations are available from Hilscher or through the PROFIdrive community. This also simplifies access to the drive solutions with PROFINET IRT.

The increased number of newly certified PROFINET Devices also shows that growth in device diversity is uninterrupted. Trouble-free interaction of different devices in the machines and systems is only assured by practice-oriented certification tests. That’s why PI invests heavily in the development of test tools and the qualification of testing laboratories.

*** End ***

Press Contact:                                                                                                

PI (PROFIBUS & PROFINET International)

Support Center

Barbara Weber

Haid-und-Neu-Str. 7

D-76131 Karlsruhe

Tel.: 07 21 /96 58 – 5 49

Fax: 07 21 / 96 58 – 5 89

Barbara.Weber@profibus.com

http://www.PROFIBUS.com

Digital I/O modules with M12 connections

Siemens has announced that the distributed I/O system ET 200AL has been extended with digital I/O modules with M12 connections.

The product portfolio of the digital I/O modules has been extended with I/O modules with M12 connections. For example, a high-channel digital input module and a digital output module with a max. switching current of 2A are available. The following I/O modules have been released for delivery:

  • DI 8x24VDC, 4xM12, DEGREE OF PROTECTION IP67
  • DI 16x24VDC, 8xM12, DEGREE OF PROTECTION IP67
  • DQ 8x24VDC/2A, 8xM12, DEGREE OF PROTECTION IP67
  • DIQ 4+DQ 4x24VDC/0.5A, 4xM12, DEGREE OF PROTECTION IP67

Link: https://support.industry.siemens.com/cs/document/109480820

The housing of the I/O module with 4xM12 connection has a width of 30 mm, the housing of module with 8xM12 connection has width of 45 mm.

 

audi-a6-montage-neckarsulmWhat’s new for UK users of PROFIBUS and PROFINET …

This is a new section on our website dedicated to revealing what’s new to the UK in the way of PROFIBUS, PROFINET and IO-Link products.

Watch this space!

%d bloggers like this: