Agenda announced for PROFIBUS, PROFINET and IO-Link October seminar

How to get the best out of PROFIBUS, PROFINET and IO-Link

aptly sums up our free-to-attend seminar taking place at the Advanced Manufacturing Technology Centre in Coventry.

Opening with a keynote address given by PI Chairman Karsten Schneider covering the latest developments in Time-Sensitive Networking (TSN), PROFINET in Process applications, Advanced Physical Layer (APL), OPC-UA and Industry 4.0, the event will address the key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications, with particular attention being paid to network design, installation and commissioning through to functional safety & cybersecurity, EMC and Industry 4.0.

Agenda

Time Item Presenter
09:00 – 09:15 Welcome and introduction Mark Freeman, Siemens
09:15 – 10:30 Keynote address: Latest developments in Time Sensitive Networking (TSN), PROFINET in Process applications, Advanced Physical Layer (APL), OPC-UA and Industry 4.0 Karsten Schneider, Chairman PROFIBUS & PROFINET International
10:30 – 11:00 Coffee and exhibition
11:00 – 11:40 Design principles for successful PROFINET networks Pietro Benfatti, Procentec
11:40 – 12:20 PROFIBUS and PROFINET device configuration tools Phil Waterworth, Endress+Hauser
12:20 – 13:00 How PROFIsafe and Cybersecurity enhance your PROFIBUS/PROFINET project Peter Brown, CSA Group
13:00 – 14:00 Lunch & Exhibition
14:00 – 14:40 New PI Guidelines for Functional Bonding and Shielding of PROFIBUS and PROFINET Peter Thomas, Control Specialists
14:40 – 15:10 IO-Link Technology Adrian Sorsby, Balluff
15:10 – 15:50 Time-Sensitive Networking in the context of PROFINET installations Hirschmann – presenter TBA
15:50 Summary, questions & close Mark Freeman

More information and online Registration

Presentations in detail

Design principles for successful PROFINET networks – Pietro Benfatti, Procentec

The presenter will lead the audience through the basics of good network design, introducing some common issues that they will then be encouraged to work together to solve, applying what they have been taught.

  • PROFINET network design basics: –
    • Cabling
    • Connectors
    • Grounding
    • Managed switches and QOS
    • Labelling
    • Training
  • Show problems to the audience: –
    • Audience to identify the problem
    • Audience to solve the problem
    • Show the audience how the problem was solved
  • Steps to prevent downtime during the commissioning and operational phase

The format will be that of an interactive discussion using large screen schematics to help redesign the network until it is made to work properly.

PROFIBUS and PROFINET device configuration tools – Phil Waterworth, Endress+Hauser

A look at the available device configuration tools and their development including the move to unify the different types into one format – FDI. This will be followed by a live demonstration of PROFIBUS and PROFINET device configuration using an existing open platform and web browser option.

How PROFIsafe and Cybersecurity enhance your PROFIBUS/PROFINET project

This paper will firstly discuss PROFIsafe, why we have the solution, what should be planned out, elements to be aware of and what PROFIsafe does well. This paper will then spend a little time covering the basics of legislation and responsibilities for safety and functional safety. The paper will then go on to quickly consider basic Cybersecurity aspects for Industrial Automation in the UK market.

New PI Guidelines for Functional Bonding and Shielding of PROFIBUS and PROFINET – Peter Thomas, Control Specialists

The ever-increasing use of high frequency switching devices in industrial automation can result in high frequency currents circulating in an equipotential bonding network that was not designed for this purpose. The absence of a proven low-impedance bonding network can result in these currents taking alternative, and often undesirable routes. Occasionally these will be the shields of industrial network cables such as PROFIBUS and PROFINET that in turn can lead to intermittent communications problems. This presentation will discuss the issues in more detail and will explain the relevance of the recently released PI guidelines “Functional Bonding and Shielding for PROFIBUS and PROFINET”.

IO-Link Technology – Balluff

This presentation will be covering what a typical IO-Link solution consists of, how it interfaces to the control system and the benefits that can be derived from this increased level of communication with IO-Link devices. These include: easier handling of measurement signals, remote and automatic device parameterisation, smart sensor diagnostic functions, safety over IO-Link whilst also being an enabler for Industrial IoT and Industry 4.0 strategies.

Time-Sensitive Networking in the context of PROFINET installations – Dale Fittes, Industrial Comms

For real-time communication with hard, non-negotiable time boundaries for end-to-end transmission latencies, all devices in this network need to have a common time reference and therefore, need to synchronize their clocks among each other. This is not only true for the end devices of a communication stream, such as an industrial controller and a manufacturing robot but also true for network components, such as Ethernet switches. Only through synchronized clocks is it possible for all network devices to operate in unison and execute the required operation at exactly the required point in time.

This is a subject that will be of interest to PROFINET network designers, installers and operators as the need for accurate time synchronisation, both within an individual network and across the whole enterprise, becomes paramount.

Who will benefit?

Supported by a tabletop exhibition of the latest products from 12 of the UK’s specialist suppliers, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers and C&I Engineers involved in the design, operation and maintenance of modern automated factories and process plant. Covering key application areas such as mechanical handling and logistics, robotics, automotive engineering, electrical and electronics assembly, control systems and energy management, pulp & paper, chemical, utilities, pharmaceutical, packaging and printing, the event will be supported by an exhibition with demonstrations of actual tools used in design, configuration, fault finding and maintenance.

Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to experts.

Places are limited so don’t delay – book today!

More information and online Registration

In case of difficulty contact Ann on tel: 00 44 207 193 8018 or email admin@profibus.org.uk